Skip to main content
WATTMATRIX LAB BENCH // 230V 50Hz
☕
WILL POWER YOUR WI-FI ROUTER230V AC
5.1DAYS
Continuous: 10W
Surge Peak: 15W

≈ 5.1 days (24h/day) · Safe motor start buffer (99.8% margin).

Ready to Run
Motor Start Margin+7185W Safe Buffer(15W Peak / 7200W Max)

How long will a Goal Zero Yeti PRO 4000 run a Wi-Fi router?

Wi-Fi router running (18 W max) and start-up (25 W max) draw fit the Goal Zero Yeti PRO 4000's 3,600 W continuous / 7,200 W surge ratings.

LOW LOAD
5.8DAYS

standalone dual-band Wi-Fi 6 router (6 W)

6 W28.47 W net
TYPICAL SPECNOMINAL
5.1DAYS

Wi-Fi 6 router plus fiber ONT or cable modem (10 W)

10 W32.78 W net
HIGH LOAD
4.0DAYS

tri-band router plus DOCSIS 3.1 cable modem under heavy load (18 W)

18 W41.41 W net
TELEMETRY // PRIMARY READOUT230V AC
CALIBRATED RUNTIME
5.1DAYS

≈ 5.1 days (24h/day)

NET PACK DRAW
32.78W

System standby power: 22W (67.1% of total draw)

CONTINUOUS_LOAD_UTILIZATION0% (10W / 3600W)
APPLIANCE_DRAW10W RUN / 15W PK
SOURCE_LIMIT3600W CONT / 7200W PK
SOLAR_RECHARGE (3000W)1.75H (0.44D)
PARAMETER_SANDBOX // ENGINE v1.0.0

Live Load, Duty Cycle & Usage Simulator

10 W
MIN 5WNOMINAL 10WMAX 2000W
100%
5% INTERMITTENT50% CYCLING100% CONTINUOUS
24 h/day
1H / DAY8H OVERNIGHT24H CONTINUOUS
0 W
0W (OFF)200WMAX 3000W
OUTPUT_PATH
TEMPERATURE DERATE
CONTINUOUS
5.1DAYS
OUTAGE SPAN
5.1days
AVG LOAD
10W
PACK DRAW
32.78W
Stack Wi-Fi router with other devices on Goal Zero Yeti PRO 4000 in the Load BuilderOpen Builder →
HARDWARE_INTERFACE // ELECTRICAL AUDIT

Goal Zero Yeti PRO 4000 × Wi-Fi Router Electrical Interface

1. AC RECEPTACLE & PLUG MATCH
BS 1363 / Europlug (230V 13A Domestic) → DIRECT FIT

Provides 4× CEE 7/3 (230V), 1× IEC Commando (32A) (120V 60Hz).

2. WAVEFORM & THD SENSITIVITY
PURE SINE WAVE // STANDARD LOAD

Pure sine wave inverter output. Safe for all standard household appliances.

3. STARTING SURGE (MOTOR INRUSH) MARGIN
15W TYP (25W MAX) VS 7200W LIMIT

Inductive motor/compressor load with 1.5× starting surge (motor inrush) (99.8% worst-case surge margin).

4. UPS SWITCHOVER & EXPANSION
UPS: UPS (10MS) · EXPAND: UP TO 19965WH

Wall AC fast charge at up to 1800W (120m to 80%, 150m to 100%).

PHYSICS // TRANSIENT DRAW ENVELOPE

Dynamic Inrush Surge Curve (Locked Rotor Amps vs Steady State)

SAFE INRUSH HEADROOM (+7185W BUFFER)
0ms250ms500ms750ms1000ms0W2s Surge Limit (7200W)7200WContinuous Rating (3600W)3600WInrush (LRA): 15WRunning (FLA): 10W

Safe envelope verified: Starting surge (15W) remains comfortably below the 7200W surge trip line, with steady-state operation settling into the safe continuous zone at 10W.

LAB_RECORDS // EMPIRICAL OBSERVATIONS

Field Engineering Quirks & Operational Failure Modes

Hardware Bench Constraints (Goal Zero Yeti PRO 4000)
  • ›Supports up to 4 Tank PRO 4000 expansion batteries, expanding total energy storage to nearly 20 kWh.
  • ›Equipped with high-power High Power Port (HPP) DC output delivering up to 30 A continuous at 12 V.
Cycle Physics & Dwell Behavior (Wi-Fi Router)
  • ›On AC power, a power station's ~15 W inverter idle draw is larger than the router's own 10 W load; powering the router's 12 V DC barrel jack from the station's 12 V DC output roughly triples runtime.
  • ›Even a 20–30 ms EPS/UPS switchover can briefly drop some wall-wart adapters if their hold-up capacitors are small, whereas a direct 12 V DC connection or inline mini-UPS avoids any reboot.
  • ›Stations with a low-load AC eco timeout (such as Jackery's 25 W and Bluetti's 15–30 W thresholds) will shut off AC power on a 10 W router unless eco mode is disabled.
KNOWLEDGE_BASE // VERIFIED QA

Frequently Asked Questions: Goal Zero Yeti PRO 4000 & Wi-Fi Router

How long will a Goal Zero Yeti PRO 4000 run a Wi-Fi router?

About 5.1 days on AC power, with the Wi-Fi router averaging 10 W (Wi-Fi 6 router plus fiber ONT or cable modem (10 W)). The Goal Zero Yeti PRO 4000 then draws about 33 W from its battery, including 22 W for the inverter itself. Best case: about 5.8 days (standalone dual-band Wi-Fi 6 router (6 W)). Worst case: about 4 days (tri-band router plus DOCSIS 3.1 cable modem under heavy load (18 W)).

Is it better to run the Wi-Fi router from DC on the Goal Zero Yeti PRO 4000?

Yes. Using the 12 V DC car-socket to 5.5×2.1 mm (DC5521) barrel cable on the Goal Zero Yeti PRO 4000's 12 V car socket, the Wi-Fi router runs about 17 days instead of 5.1 days on AC, 236% longer, because it skips the inverter's conversion loss and its 22 W idle draw.

Why isn't the runtime just 3,993 Wh ÷ 10 W?

That simple division gives 16.6 days, but the Goal Zero Yeti PRO 4000's inverter draws about 22 W whenever its AC outlets are on. At this light load that's 67% of everything the battery supplies, and inverter conversion losses take a further share. The idle figure comes from Goal Zero.

How long does the Goal Zero Yeti PRO 4000 take to recharge?

On wall power: about 120 minutes to 80% and 150 minutes to full (Goal Zero figures). With its maximum 3,000 W of solar input connected, expect about 2,400 W in full sun, so a full recharge takes roughly 1.8 hours of full sun, so it can refill in a single day with 4 peak sun hours.

Can the Goal Zero Yeti PRO 4000 keep a Wi-Fi router running during a power cut?

It can act as a backup supply: with the Wi-Fi router plugged into the Goal Zero Yeti PRO 4000 and the Goal Zero Yeti PRO 4000 plugged into the wall, it switches the Wi-Fi router to battery in about 10 ms when the grid fails (Goal Zero calls this UPS mode).

AUDIT_LOG // DATA PROVENANCE & CITATIONS
NODE: goal-zero-yeti-pro-4000/wifi-routerSYSTEM HASH: 0xD9F681931B8FVERIFIED TIMESTAMP: 2026-10-25T00:00:00Z
SOURCE_CITATIONS // GOAL ZERO YETI PRO 4000 (2)
LOAD_CITATIONS // WI-FI ROUTER (2)