Skip to main content
WATTMATRIX LAB BENCH // 230V 50Hz
☕
WILL POWER YOUR HOME NETWORK RACK230V AC
2.4DAYS
Continuous: 45W
Surge Peak: 50W

≈ 2.4 days (24h/day) · Safe motor start buffer (99.3% margin).

Ready to Run
Motor Start Margin+7150W Safe Buffer(50W Peak / 7200W Max)

How long will a Goal Zero Yeti PRO 4000 run a home network rack?

home network rack running (75 W max) and start-up (85 W max) draw fit the Goal Zero Yeti PRO 4000's 3,600 W continuous / 7,200 W surge ratings.

LOW LOAD
3.1DAYS

Fiber ONT optical modem + managed 8-port gigabit switch (30 W)

30 W54.35 W net
TYPICAL SPECNOMINAL
2.4DAYS

Fiber ONT + Wi-Fi 6 router + 4 PoE IP security cameras + NVR recorder (45 W)

45 W70.55 W net
HIGH LOAD
38.8HRS

Managed 16-port PoE switch + 8 cameras + local NAS storage server (75 W)

75 W102.98 W net
TELEMETRY // PRIMARY READOUT230V AC
CALIBRATED RUNTIME
2.4DAYS

≈ 2.4 days (24h/day)

NET PACK DRAW
70.55W

System standby power: 22W (31.2% of total draw)

CONTINUOUS_LOAD_UTILIZATION1% (45W / 3600W)
APPLIANCE_DRAW45W RUN / 50W PK
SOURCE_LIMIT3600W CONT / 7200W PK
SOLAR_RECHARGE (3000W)1.75H (0.44D)
PARAMETER_SANDBOX // ENGINE v1.0.0

Live Load, Duty Cycle & Usage Simulator

45 W
MIN 15WNOMINAL 45WMAX 2000W
100%
5% INTERMITTENT50% CYCLING100% CONTINUOUS
24 h/day
1H / DAY8H OVERNIGHT24H CONTINUOUS
0 W
0W (OFF)200WMAX 3000W
OUTPUT_PATH
TEMPERATURE DERATE
CONTINUOUS
2.4DAYS
OUTAGE SPAN
2.4days
AVG LOAD
45W
PACK DRAW
70.55W
Stack home network rack with other devices on Goal Zero Yeti PRO 4000 in the Load BuilderOpen Builder →
HARDWARE_INTERFACE // ELECTRICAL AUDIT

Goal Zero Yeti PRO 4000 × Home Network & PoE Security System Electrical Interface

1. AC RECEPTACLE & PLUG MATCH
BS 1363 (230V 13A Irish Standard Plug) → DIRECT FIT

Provides 4× CEE 7/3 (230V), 1× IEC Commando (32A) (120V 60Hz).

2. WAVEFORM & THD SENSITIVITY
PURE SINE WAVE // STANDARD LOAD

Pure sine wave inverter output. Safe for all standard household appliances.

3. STARTING SURGE (MOTOR INRUSH) MARGIN
50W TYP (85W MAX) VS 7200W LIMIT

Electronic/resistive load with 1.1× start-up profile (99.3% surge margin).

4. UPS SWITCHOVER & EXPANSION
UPS: UPS (10MS) · EXPAND: UP TO 19965WH

Wall AC fast charge at up to 1800W (120m to 80%, 150m to 100%).

PHYSICS // TRANSIENT DRAW ENVELOPE

Dynamic Inrush Surge Curve (Locked Rotor Amps vs Steady State)

SAFE INRUSH HEADROOM (+7150W BUFFER)
0ms250ms500ms750ms1000ms0W2s Surge Limit (7200W)7200WContinuous Rating (3600W)3600WStartup: 45WRunning (FLA): 45W

Safe envelope verified: Starting surge (50W) remains comfortably below the 7200W surge trip line, with steady-state operation settling into the safe continuous zone at 45W.

LAB_RECORDS // EMPIRICAL OBSERVATIONS

Field Engineering Quirks & Operational Failure Modes

Hardware Bench Constraints (Goal Zero Yeti PRO 4000)
  • ›Supports up to 4 Tank PRO 4000 expansion batteries, expanding total energy storage to nearly 20 kWh.
  • ›Equipped with high-power High Power Port (HPP) DC output delivering up to 30 A continuous at 12 V.
Cycle Physics & Dwell Behavior (Home Network & PoE Security System)
  • ›Powering network gear directly over 12 V DC bypasses AC inverter tare loss, boosting battery runtime by 20–30%.
KNOWLEDGE_BASE // VERIFIED QA

Frequently Asked Questions: Goal Zero Yeti PRO 4000 & Home Network & PoE Security System

How long will a Goal Zero Yeti PRO 4000 run a home network rack?

About 57 hours on AC power, with the home network rack averaging 45 W (Fiber ONT + Wi-Fi 6 router + 4 PoE IP security cameras + NVR recorder (45 W)). The Goal Zero Yeti PRO 4000 then draws about 71 W from its battery, including 22 W for the inverter itself. Best case: about 3.1 days (Fiber ONT optical modem + managed 8-port gigabit switch (30 W)). Worst case: about 39 hours (Managed 16-port PoE switch + 8 cameras + local NAS storage server (75 W)).

Is it better to run the home network rack from DC on the Goal Zero Yeti PRO 4000?

Yes. Using the 12V DC Regulated Terminal / Barrel Power Kit on the Goal Zero Yeti PRO 4000's 12 V car socket, the home network rack runs about 3.8 days instead of 57 hours on AC, 62% longer, because it skips the inverter's conversion loss and its 22 W idle draw.

Why isn't the runtime just 3,993 Wh ÷ 45 W?

That simple division gives 3.7 days, but the Goal Zero Yeti PRO 4000's inverter draws about 22 W whenever its AC outlets are on. At this light load that's 31% of everything the battery supplies, and inverter conversion losses take a further share. The idle figure comes from Goal Zero.

How long does the Goal Zero Yeti PRO 4000 take to recharge?

On wall power: about 120 minutes to 80% and 150 minutes to full (Goal Zero figures). With its maximum 3,000 W of solar input connected, expect about 2,400 W in full sun, so a full recharge takes roughly 1.8 hours of full sun, so it can refill in a single day with 4 peak sun hours.

Can the Goal Zero Yeti PRO 4000 keep a home network rack running during a power cut?

It can act as a backup supply: with the home network rack plugged into the Goal Zero Yeti PRO 4000 and the Goal Zero Yeti PRO 4000 plugged into the wall, it switches the home network rack to battery in about 10 ms when the grid fails (Goal Zero calls this UPS mode).

AUDIT_LOG // DATA PROVENANCE & CITATIONS
NODE: goal-zero-yeti-pro-4000/home-networkSYSTEM HASH: 0x897BA458A285VERIFIED TIMESTAMP: 2026-10-25T00:00:00Z
SOURCE_CITATIONS // GOAL ZERO YETI PRO 4000 (2)
LOAD_CITATIONS // HOME NETWORK & POE SECURITY SYSTEM (1)