Skip to main content
WATTMATRIX LAB BENCH // 230V 50Hz
☕
WILL POWER YOUR 1/2 HP WELL PUMP230V AC
40.1HRS
Continuous: 1050W
Surge Peak: 3200W

≈ 1.7 days (24h/day) · Safe motor start buffer (55.6% margin).

Ready to Run
Motor Start Margin+4000W Safe Buffer(3200W Peak / 7200W Max)

How long will a Goal Zero Yeti PRO 4000 run a 1/2 HP well pump?

1/2 HP well pump running (1,250 W max) and start-up (3,800 W max) draw fit the Goal Zero Yeti PRO 4000's 3,600 W continuous / 7,200 W surge ratings.

LOW LOAD
3.7DAYS

shallow water table with low head pressure demand (850 W run, 2,500 W surge)

21.25 W45.44 W net
TYPICAL SPECNOMINAL
40.1HRS

standard 100-ft deep residential well cycling on 30/50 PSI pressure switch (1,050 W run, 3,200 W surge)

70 W99.63 W net
HIGH LOAD
13.3HRS

deep drawdown or continuous tank refill against high head pressure (1,250 W run, 3,800 W surge)

250 W300.78 W net
TELEMETRY // PRIMARY READOUT230V AC
CALIBRATED RUNTIME
40.1HRS

≈ 1.7 days (24h/day)

NET PACK DRAW
99.63W

System standby power: 22W (22.1% of total draw)

CONTINUOUS_LOAD_UTILIZATION29% (1050W / 3600W)
APPLIANCE_DRAW1050W RUN / 3200W PK
SOURCE_LIMIT3600W CONT / 7200W PK
SOLAR_RECHARGE (3000W)1.75H (0.44D)
PARAMETER_SANDBOX // ENGINE v1.0.0

Live Load, Duty Cycle & Usage Simulator

1050 W
MIN 425WNOMINAL 1050WMAX 2000W
7%
5% INTERMITTENT50% CYCLING100% CONTINUOUS
24 h/day
1H / DAY8H OVERNIGHT24H CONTINUOUS
0 W
0W (OFF)200WMAX 3000W
TEMPERATURE DERATE
CONTINUOUS
40.1HRS
OUTAGE SPAN
1.7days
AVG LOAD
70W
PACK DRAW
99.63W
Stack 1/2 HP well pump with other devices on Goal Zero Yeti PRO 4000 in the Load BuilderOpen Builder →
HARDWARE_INTERFACE // ELECTRICAL AUDIT

Goal Zero Yeti PRO 4000 × 1/2 HP Deep Well Submersible Pump Electrical Interface

1. AC RECEPTACLE & PLUG MATCH
BS 1363 (230V 13A Irish Standard Plug) → DIRECT FIT

Provides 4× CEE 7/3 (230V), 1× IEC Commando (32A) (120V 60Hz).

2. WAVEFORM & THD SENSITIVITY
PURE SINE WAVE // THD-SENSITIVE LOAD

Pure sine wave inverter output. Safe for sensitive medical electronics and variable-speed motors.

3. STARTING SURGE (MOTOR INRUSH) MARGIN
3200W TYP (3800W MAX) VS 7200W LIMIT

Inductive motor/compressor load with 3× starting surge (motor inrush) (55.6% worst-case surge margin).

4. UPS SWITCHOVER & EXPANSION
UPS: UPS (10MS) · EXPAND: UP TO 19965WH

Wall AC fast charge at up to 1800W (120m to 80%, 150m to 100%).

PHYSICS // TRANSIENT DRAW ENVELOPE

Dynamic Inrush Surge Curve (Locked Rotor Amps vs Steady State)

SAFE INRUSH HEADROOM (+4000W BUFFER)
0ms250ms500ms750ms1000ms0W2s Surge Limit (7200W)7200WContinuous Rating (3600W)3600WInrush (LRA): 3200WRunning (FLA): 1050W

Safe envelope verified: Starting surge (3200W) remains comfortably below the 7200W surge trip line, with steady-state operation settling into the safe continuous zone at 1050W.

LAB_RECORDS // EMPIRICAL OBSERVATIONS

Field Engineering Quirks & Operational Failure Modes

Hardware Bench Constraints (Goal Zero Yeti PRO 4000)
  • ›Supports up to 4 Tank PRO 4000 expansion batteries, expanding total energy storage to nearly 20 kWh.
  • ›Equipped with high-power High Power Port (HPP) DC output delivering up to 30 A continuous at 12 V.
Cycle Physics & Dwell Behavior (1/2 HP Deep Well Submersible Pump)
  • ›Submersible pump motors start against heavy standing water columns; inverters with surge capacity under 3,200 W will trip on overload immediately.
  • ›Water pumping is intermittent: when connected to a 40-gallon bladder tank, a 4-cycle/hour schedule only runs 4 minutes per hour total (~6.7% duty cycle).
KNOWLEDGE_BASE // VERIFIED QA

Frequently Asked Questions: Goal Zero Yeti PRO 4000 & 1/2 HP Deep Well Submersible Pump

How long will a Goal Zero Yeti PRO 4000 run a 1/2 HP well pump?

About 40 hours on AC power, with the 1/2 HP well pump averaging 70 W (standard 100-ft deep residential well cycling on 30/50 PSI pressure switch (1,050 W run, 3,200 W surge)). The Goal Zero Yeti PRO 4000 then draws about 100 W from its battery, including 22 W for the inverter itself. Best case: about 3.7 days (shallow water table with low head pressure demand (850 W run, 2,500 W surge)). Worst case: about 13.3 hours (deep drawdown or continuous tank refill against high head pressure (1,250 W run, 3,800 W surge)).

Can a Goal Zero Yeti PRO 4000 start a 1/2 HP well pump?

Yes. The 1/2 HP well pump's start-up peak of about 3,200 W (up to 3,800 W) fits within the Goal Zero Yeti PRO 4000's 7,200 W surge rating, with 47% headroom even in the worst case.

Why isn't the runtime just 3,993 Wh ÷ 70 W?

That simple division gives 57 hours, but the Goal Zero Yeti PRO 4000's inverter draws about 22 W whenever its AC outlets are on. At this light load that's 22% of everything the battery supplies, and inverter conversion losses take a further share. The idle figure comes from Goal Zero.

How long does the Goal Zero Yeti PRO 4000 take to recharge?

On wall power: about 120 minutes to 80% and 150 minutes to full (Goal Zero figures). With its maximum 3,000 W of solar input connected, expect about 2,400 W in full sun, so a full recharge takes roughly 1.8 hours of full sun, so it can refill in a single day with 4 peak sun hours.

AUDIT_LOG // DATA PROVENANCE & CITATIONS
NODE: goal-zero-yeti-pro-4000/well-pump-half-hpSYSTEM HASH: 0x470795DD7F41VERIFIED TIMESTAMP: 2026-10-25T00:00:00Z
SOURCE_CITATIONS // GOAL ZERO YETI PRO 4000 (2)
LOAD_CITATIONS // 1/2 HP DEEP WELL SUBMERSIBLE PUMP (2)