Skip to main content
WATTMATRIX LAB BENCH // 230V 50Hz
☕
WILL POWER YOUR WI-FI ROUTER230V AC
36.9HRS
Continuous: 10W
Surge Peak: 15W

≈ 1.5 days (24h/day) · Safe motor start buffer (99.1% margin).

Ready to Run
Motor Start Margin+1585W Safe Buffer(15W Peak / 1600W Max)

How long will an EcoFlow RIVER 2 Pro run a Wi-Fi router?

Wi-Fi router running (18 W max) and start-up (25 W max) draw fit the EcoFlow RIVER 2 Pro's 800 W continuous / 1,600 W surge ratings.

LOW LOAD
46.6HRS

standalone dual-band Wi-Fi 6 router (6 W)

6 W16.47 W net
TYPICAL SPECNOMINAL
36.9HRS

Wi-Fi 6 router plus fiber ONT or cable modem (10 W)

10 W20.79 W net
HIGH LOAD
26.1HRS

tri-band router plus DOCSIS 3.1 cable modem under heavy load (18 W)

18 W29.44 W net
TELEMETRY // PRIMARY READOUT230V AC
CALIBRATED RUNTIME
36.9HRS

≈ 1.5 days (24h/day)

NET PACK DRAW
20.79W

System standby power: 10W (48.1% of total draw)

CONTINUOUS_LOAD_UTILIZATION1% (10W / 800W)
APPLIANCE_DRAW10W RUN / 15W PK
SOURCE_LIMIT800W CONT / 1600W PK
SOLAR_RECHARGE (220W)4.59H (1.15D)
PARAMETER_SANDBOX // ENGINE v1.0.0

Live Load, Duty Cycle & Usage Simulator

10 W
MIN 5WNOMINAL 10WMAX 800W
100%
5% INTERMITTENT50% CYCLING100% CONTINUOUS
24 h/day
1H / DAY8H OVERNIGHT24H CONTINUOUS
0 W
0W (OFF)200WMAX 220W
OUTPUT_PATH
TEMPERATURE DERATE
CONTINUOUS
36.9HRS
OUTAGE SPAN
1.5days
AVG LOAD
10W
PACK DRAW
20.79W
Stack Wi-Fi router with other devices on EcoFlow RIVER 2 Pro in the Load BuilderOpen Builder →
HARDWARE_INTERFACE // ELECTRICAL AUDIT

EcoFlow RIVER 2 Pro × Wi-Fi Router Electrical Interface

1. AC RECEPTACLE & PLUG MATCH
BS 1363 / Europlug (230V 13A Domestic) → DIRECT FIT

Provides 4× BS 1363 (230V) (120V 60Hz).

2. WAVEFORM & THD SENSITIVITY
PURE SINE WAVE // STANDARD LOAD

Pure sine wave inverter output. Safe for all standard household appliances.

3. STARTING SURGE (MOTOR INRUSH) MARGIN
15W TYP (25W MAX) VS 1600W LIMIT

Inductive motor/compressor load with 1.5× starting surge (motor inrush) (99.1% worst-case surge margin).

4. UPS SWITCHOVER & EXPANSION
UPS: EPS (30MS) · EXPAND: FIXED

Wall AC fast charge at up to 940W (55m to 80%, 70m to 100%).

PHYSICS // TRANSIENT DRAW ENVELOPE

Dynamic Inrush Surge Curve (Locked Rotor Amps vs Steady State)

SAFE INRUSH HEADROOM (+1585W BUFFER)
0ms250ms500ms750ms1000ms0W2s Surge Limit (1600W)1600WContinuous Rating (800W)800WInrush (LRA): 15WRunning (FLA): 10W

Safe envelope verified: Starting surge (15W) remains comfortably below the 1600W surge trip line, with steady-state operation settling into the safe continuous zone at 10W.

LAB_RECORDS // EMPIRICAL OBSERVATIONS

Field Engineering Quirks & Operational Failure Modes

Hardware Bench Constraints (EcoFlow RIVER 2 Pro)
  • ›X-Boost mode permits running resistive heating loads up to 1,600 W at lowered voltage, but should be avoided for electronics or inductive motors.
  • ›EPS mode provides a 30 ms grid-to-battery switchover during an unexpected blackout.
  • ›The 12 V car output port is regulated at 12.6 V up to 10 A (126 W max).
Cycle Physics & Dwell Behavior (Wi-Fi Router)
  • ›On AC power, a power station's ~15 W inverter idle draw is larger than the router's own 10 W load; powering the router's 12 V DC barrel jack from the station's 12 V DC output roughly triples runtime.
  • ›Even a 20–30 ms EPS/UPS switchover can briefly drop some wall-wart adapters if their hold-up capacitors are small, whereas a direct 12 V DC connection or inline mini-UPS avoids any reboot.
  • ›Stations with a low-load AC eco timeout (such as Jackery's 25 W and Bluetti's 15–30 W thresholds) will shut off AC power on a 10 W router unless eco mode is disabled.
KNOWLEDGE_BASE // VERIFIED QA

Frequently Asked Questions: EcoFlow RIVER 2 Pro & Wi-Fi Router

How long will an EcoFlow RIVER 2 Pro run a Wi-Fi router?

About 37 hours on AC power, with the Wi-Fi router averaging 10 W (Wi-Fi 6 router plus fiber ONT or cable modem (10 W)). The EcoFlow RIVER 2 Pro then draws about 21 W from its battery, including 10 W for the inverter itself. Best case: about 47 hours (standalone dual-band Wi-Fi 6 router (6 W)). Worst case: about 26 hours (tri-band router plus DOCSIS 3.1 cable modem under heavy load (18 W)).

Is it better to run the Wi-Fi router from DC on the EcoFlow RIVER 2 Pro?

Yes. Using the 12 V DC car-socket to 5.5×2.1 mm (DC5521) barrel cable on the EcoFlow RIVER 2 Pro's 12 V car socket, the Wi-Fi router runs about 3.3 days instead of 37 hours on AC, 113% longer, because it skips the inverter's conversion loss and its 10 W idle draw.

Why isn't the runtime just 768 Wh ÷ 10 W?

That simple division gives 3.2 days, but the EcoFlow RIVER 2 Pro's inverter draws about 10 W whenever its AC outlets are on. At this light load that's 48% of everything the battery supplies, and inverter conversion losses take a further share. The idle figure comes from EcoFlow.

How long does the EcoFlow RIVER 2 Pro take to recharge?

On wall power: about 55 minutes to 80% and 70 minutes to full (EcoFlow figures). With its maximum 220 W of solar input connected, expect about 176 W in full sun, so a full recharge takes roughly 4.6 hours of full sun, about 1.2 days at 4 peak sun hours a day.

Can the EcoFlow RIVER 2 Pro keep a Wi-Fi router running during a power cut?

It can act as a backup supply: with the Wi-Fi router plugged into the EcoFlow RIVER 2 Pro and the EcoFlow RIVER 2 Pro plugged into the wall, it switches the Wi-Fi router to battery in about 30 ms when the grid fails (EcoFlow calls this EPS mode).

AUDIT_LOG // DATA PROVENANCE & CITATIONS
NODE: ecoflow-river-2-pro/wifi-routerSYSTEM HASH: 0xC679B362232CVERIFIED TIMESTAMP: 2026-10-22T00:00:00Z
SOURCE_CITATIONS // ECOFLOW RIVER 2 PRO (3)
LOAD_CITATIONS // WI-FI ROUTER (2)