Skip to main content
WATTMATRIX LAB BENCH // 230V 50Hz
☕
WILL POWER YOUR PELLET STOVE230V AC
4.4HRS
Continuous: 150W
Surge Peak: 500W

≈ 0.4 days (12h/day) · Safe motor start buffer (68.8% margin).

Ready to Run
Motor Start Margin+1100W Safe Buffer(500W Peak / 1600W Max)

How long will an EcoFlow RIVER 2 Pro run a pellet stove?

pellet stove running (220 W max) and start-up (750 W max) draw fit the EcoFlow RIVER 2 Pro's 800 W continuous / 1,600 W surge ratings.

LOW LOAD
6.4HRS

Modulated low fire: motorized auger feed and exhaust fan running continuously (100 W)

100 W119.08 W net
TYPICAL SPECNOMINAL
4.4HRS

Medium fire heat setting: continuous combustion blower, room fan, and intermittent auger (150 W)

150 W174.63 W net
HIGH LOAD
3.0HRS

Startup ignition cycle: ceramic electric glow igniter element active for first 15 minutes (500 W peak)

220 W253.56 W net
TELEMETRY // PRIMARY READOUT230V AC
CALIBRATED RUNTIME
4.4HRS

≈ 0.4 days (12h/day)

NET PACK DRAW
174.63W

System standby power: 10W (5.7% of total draw)

CONTINUOUS_LOAD_UTILIZATION19% (150W / 800W)
APPLIANCE_DRAW150W RUN / 500W PK
SOURCE_LIMIT800W CONT / 1600W PK
SOLAR_RECHARGE (220W)4.59H (1.15D)
PARAMETER_SANDBOX // ENGINE v1.0.0

Live Load, Duty Cycle & Usage Simulator

150 W
MIN 50WNOMINAL 150WMAX 800W
100%
5% INTERMITTENT50% CYCLING100% CONTINUOUS
12 h/day
1H / DAY8H OVERNIGHT24H CONTINUOUS
0 W
0W (OFF)200WMAX 220W
TEMPERATURE DERATE
CONTINUOUS
4.4HRS
OUTAGE SPAN
0.4days
AVG LOAD
150W
PACK DRAW
174.63W
Stack pellet stove with other devices on EcoFlow RIVER 2 Pro in the Load BuilderOpen Builder →
HARDWARE_INTERFACE // ELECTRICAL AUDIT

EcoFlow RIVER 2 Pro × Pellet Stove with Electric Auger Electrical Interface

1. AC RECEPTACLE & PLUG MATCH
BS 1363 (230V 13A Irish Standard Plug) → DIRECT FIT

Provides 4× BS 1363 (230V) (120V 60Hz).

2. WAVEFORM & THD SENSITIVITY
PURE SINE WAVE // THD-SENSITIVE LOAD

Pure sine wave inverter output. Safe for sensitive medical electronics and variable-speed motors.

3. STARTING SURGE (MOTOR INRUSH) MARGIN
500W TYP (750W MAX) VS 1600W LIMIT

Inductive motor/compressor load with 3.3× starting surge (motor inrush) (68.8% worst-case surge margin).

4. UPS SWITCHOVER & EXPANSION
UPS: EPS (30MS) · EXPAND: FIXED

Wall AC fast charge at up to 940W (55m to 80%, 70m to 100%).

PHYSICS // TRANSIENT DRAW ENVELOPE

Dynamic Inrush Surge Curve (Locked Rotor Amps vs Steady State)

SAFE INRUSH HEADROOM (+1100W BUFFER)
0ms250ms500ms750ms1000ms0W2s Surge Limit (1600W)1600WContinuous Rating (800W)800WInrush (LRA): 500WRunning (FLA): 150W

Safe envelope verified: Starting surge (500W) remains comfortably below the 1600W surge trip line, with steady-state operation settling into the safe continuous zone at 150W.

LAB_RECORDS // EMPIRICAL OBSERVATIONS

Field Engineering Quirks & Operational Failure Modes

Hardware Bench Constraints (EcoFlow RIVER 2 Pro)
  • ›X-Boost mode permits running resistive heating loads up to 1,600 W at lowered voltage, but should be avoided for electronics or inductive motors.
  • ›EPS mode provides a 30 ms grid-to-battery switchover during an unexpected blackout.
  • ›The 12 V car output port is regulated at 12.6 V up to 10 A (126 W max).
Cycle Physics & Dwell Behavior (Pellet Stove with Electric Auger)
  • ›If power drops suddenly without UPS switchover, unburned exhaust smoke can back-draft into the living space as the draft fan stops.
KNOWLEDGE_BASE // VERIFIED QA

Frequently Asked Questions: EcoFlow RIVER 2 Pro & Pellet Stove with Electric Auger

How long will an EcoFlow RIVER 2 Pro run a pellet stove?

About 4.4 hours on AC power, with the pellet stove averaging 150 W (Medium fire heat setting: continuous combustion blower, room fan, and intermittent auger (150 W)). The EcoFlow RIVER 2 Pro then draws about 175 W from its battery, including 10 W for the inverter itself. Best case: about 6.4 hours (Modulated low fire: motorized auger feed and exhaust fan running continuously (100 W)). Worst case: about 3 hours (Startup ignition cycle: ceramic electric glow igniter element active for first 15 minutes (500 W peak)). At 12 hours a day, that's about 0.4 days.

Can an EcoFlow RIVER 2 Pro start a pellet stove?

Yes. The pellet stove's start-up peak of about 500 W (up to 750 W) fits within the EcoFlow RIVER 2 Pro's 1,600 W surge rating, with 53% headroom even in the worst case.

How long does the EcoFlow RIVER 2 Pro take to recharge?

On wall power: about 55 minutes to 80% and 70 minutes to full (EcoFlow figures). With its maximum 220 W of solar input connected, expect about 176 W in full sun, so a full recharge takes roughly 4.6 hours of full sun, about 1.2 days at 4 peak sun hours a day.

Can the EcoFlow RIVER 2 Pro keep a pellet stove running during a power cut?

It can act as a backup supply: with the pellet stove plugged into the EcoFlow RIVER 2 Pro and the EcoFlow RIVER 2 Pro plugged into the wall, it switches the pellet stove to battery in about 30 ms when the grid fails (EcoFlow calls this EPS mode).

AUDIT_LOG // DATA PROVENANCE & CITATIONS
NODE: ecoflow-river-2-pro/pellet-stoveSYSTEM HASH: 0xAC423E916B9CVERIFIED TIMESTAMP: 2026-10-22T00:00:00Z
SOURCE_CITATIONS // ECOFLOW RIVER 2 PRO (3)
LOAD_CITATIONS // PELLET STOVE WITH ELECTRIC AUGER (1)