Skip to main content
WATTMATRIX LAB BENCH // 230V 50Hz
☕
WILL POWER YOUR 1/2 HP SUMP230V AC
5.3HRS
Continuous: 1050W
Surge Peak: 2300W

≈ 0.2 days (24h/day) · Safe motor start buffer (14.8% margin).

Ready to Run
Motor Start Margin+400W Safe Buffer(2300W Peak / 2700W Max)

How long will an EcoFlow DELTA 2 run a 1/2 HP sump?

1/2 HP sump running (1,150 W max) and start-up (2,700 W max) draw fit the EcoFlow DELTA 2's 1,800 W continuous / 2,700 W surge ratings.

LOW LOAD
31.0HRS

light rain: 4 cycles/h × 18 s at 800 W (16 W avg)

16 W33.02 W net
TYPICAL SPECNOMINAL
5.3HRS

active storm: 15 cycles/h × 36 s at 1,050 W (158 W avg)

157.5 W194.9 W net
HIGH LOAD
2.5HRS

severe flooding: 24 cycles/h × 45 s at 1,150 W (345 W avg)

345 W411.32 W net
TELEMETRY // PRIMARY READOUT230V AC
CALIBRATED RUNTIME
5.3HRS

≈ 0.2 days (24h/day)

NET PACK DRAW
194.9W

System standby power: 15W (7.7% of total draw)

CONTINUOUS_LOAD_UTILIZATION58% (1050W / 1800W)
APPLIANCE_DRAW1050W RUN / 2300W PK
SOURCE_LIMIT1800W CONT / 2700W PK
SOLAR_RECHARGE (500W)2.69H (0.67D)
PARAMETER_SANDBOX // ENGINE v1.0.0

Live Load, Duty Cycle & Usage Simulator

1050 W
MIN 400WNOMINAL 1050WMAX 1800W
15%
5% INTERMITTENT50% CYCLING100% CONTINUOUS
24 h/day
1H / DAY8H OVERNIGHT24H CONTINUOUS
0 W
0W (OFF)200WMAX 500W
TEMPERATURE DERATE
CONTINUOUS
5.3HRS
OUTAGE SPAN
0.2days
AVG LOAD
157.5W
PACK DRAW
194.9W
Stack 1/2 HP sump with other devices on EcoFlow DELTA 2 in the Load BuilderOpen Builder →
HARDWARE_INTERFACE // ELECTRICAL AUDIT

EcoFlow DELTA 2 × 1/2 HP Sump Pump Electrical Interface

1. AC RECEPTACLE & PLUG MATCH
BS 1363 (230V 13A Irish Standard Plug) → DIRECT FIT

Provides 2× CEE 7/3 (230V) (120V 60Hz).

2. WAVEFORM & THD SENSITIVITY
PURE SINE WAVE // STANDARD LOAD

Pure sine wave inverter output. Safe for all standard household appliances.

3. STARTING SURGE (MOTOR INRUSH) MARGIN
2300W TYP (2700W MAX) VS 2700W LIMIT

Inductive motor/compressor load with 2.2× starting surge (motor inrush) (14.8% worst-case surge margin).

4. UPS SWITCHOVER & EXPANSION
UPS: EPS (30MS) · EXPAND: UP TO 3072WH

Wall AC fast charge at up to 1200W (50m to 80%, 80m to 100%).

PHYSICS // TRANSIENT DRAW ENVELOPE

Dynamic Inrush Surge Curve (Locked Rotor Amps vs Steady State)

SAFE INRUSH HEADROOM (+400W BUFFER)
0ms250ms500ms750ms1000ms0W2s Surge Limit (2700W)2700WContinuous Rating (1800W)1800WInrush (LRA): 2300WRunning (FLA): 1050W

Safe envelope verified: Starting surge (2300W) remains comfortably below the 2700W surge trip line, with steady-state operation settling into the safe continuous zone at 1050W.

LAB_RECORDS // EMPIRICAL OBSERVATIONS

Field Engineering Quirks & Operational Failure Modes

Hardware Bench Constraints (EcoFlow DELTA 2)
  • ›X-Boost engages automatically above 1,800 W and runs resistive loads up to 2,200 W at reduced voltage. EcoFlow says it's meant for heating loads, not voltage-sensitive devices, and it's unavailable while the AC output is in wall-charging bypass.
  • ›EPS mode: on wall power, connected loads run from the grid and switch to battery within 30 ms if the power fails. EcoFlow says this is not 0 ms and not suitable for servers or workstations.
  • ›The AC output switches off after 12 hours with no load; set the app's AC timeout to 'Never' for intermittent loads such as fridges.
  • ›Only 2 of the 6 AC outlets are grounded (NEMA 5-20R); the other 4 are two-prong NEMA 1-15R.
  • ›The car socket and both DC5521 ports share one 126 W budget.
  • ›EcoFlow's US product page lists 3,000 cycles to 80%, while the July 2025 US manual says 4,000; we use 3,000.
Cycle Physics & Dwell Behavior (1/2 HP Sump Pump)
  • ›Sizing a backup source for a 1/2 HP sump pump is governed by its inductive starting surge (~2,300–2,700 W), which exceeds the 2,200 W starting limit of compact 2,000 W-class inverter generators.
  • ›When connected to a portable power station, the station's AC inverter must stay on continuously waiting for the float switch, adding ~15 W of constant idle draw between pump cycles.
  • ›Disable any power-saving AC auto-shutoff mode on the power station so the outlet remains live between float-switch cycles.
KNOWLEDGE_BASE // VERIFIED QA

Frequently Asked Questions: EcoFlow DELTA 2 & 1/2 HP Sump Pump

How long will an EcoFlow DELTA 2 run a 1/2 HP sump?

About 5.3 hours on AC power, with the 1/2 HP sump averaging 158 W (active storm: 15 cycles/h × 36 s at 1,050 W (158 W avg)). The EcoFlow DELTA 2 then draws about 195 W from its battery, including 15 W for the inverter itself. Best case: about 31 hours (light rain: 4 cycles/h × 18 s at 800 W (16 W avg)). Worst case: about 2.5 hours (severe flooding: 24 cycles/h × 45 s at 1,150 W (345 W avg)).

Can an EcoFlow DELTA 2 start a 1/2 HP sump?

Yes. The 1/2 HP sump's start-up peak of about 2,300 W (up to 2,700 W) fits within the EcoFlow DELTA 2's 2,700 W surge rating, with 0% headroom even in the worst case.

How long does the EcoFlow DELTA 2 take to recharge?

On wall power: about 50 minutes to 80% and 80 minutes to full (EcoFlow figures). With its maximum 500 W of solar input connected, expect about 400 W in full sun, so a full recharge takes roughly 2.7 hours of full sun, so it can refill in a single day with 4 peak sun hours.

AUDIT_LOG // DATA PROVENANCE & CITATIONS
NODE: ecoflow-delta-2/sump-pumpSYSTEM HASH: 0x7D2E0B2D7B3DVERIFIED TIMESTAMP: 2026-10-21T00:00:00Z
SOURCE_CITATIONS // ECOFLOW DELTA 2 (8)
LOAD_CITATIONS // 1/2 HP SUMP PUMP (2)