WILL POWER YOUR 1/2 HP SUMP230V AC

5.4HRS

Continuous: 1050W

Surge Peak: 2300W

≈ 0.2 days (24h/day) · Safe motor start buffer (4.2% margin).

Reduced Power Mode

Motor Start Margin+100W Safe Buffer(2300W Peak / 2400W Max)

How long will an Anker SOLIX C1000 run a 1/2 HP sump?

Typical draw fits the Anker SOLIX C1000's ratings; the worst case (1,150 W running, 2,700 W start-up) does not.

LOW LOAD

32.0HRS

light rain: 4 cycles/h × 18 s at 800 W (16 W avg)

16 W33.02 W net

TYPICAL SPECNOMINAL

5.4HRS

active storm: 15 cycles/h × 36 s at 1,050 W (158 W avg)

157.5 W194.9 W net

HIGH LOAD

OVERLOAD

severe flooding: 24 cycles/h × 45 s at 1,150 W (345 W avg)

TELEMETRY // PRIMARY READOUT230V AC

CALIBRATED RUNTIME

5.4HRS

≈ 0.2 days (24h/day)

NET PACK DRAW

194.9W

System standby power: 15W (7.7% of total draw)

CONTINUOUS_LOAD_UTILIZATION58% (1050W / 1800W)

APPLIANCE_DRAW1050W RUN / 2300W PK

SOURCE_LIMIT1800W CONT / 2400W PK

SOLAR_RECHARGE (600W)2.32H (0.58D)

PARAMETER_SANDBOX // ENGINE v1.0.0

Live Load, Duty Cycle & Usage Simulator

Active Running Load1050 W

MIN 400WNOMINAL 1050WMAX 1800W

Compressor / Cycling Duty Factor15%

5% INTERMITTENT50% CYCLING100% CONTINUOUS

Active Usage Window per Day24 h/day

1H / DAY8H OVERNIGHT24H CONTINUOUS

Solar Generation Array0 W

0W (OFF)200WMAX 600W

TEMPERATURE DERATE

CONTINUOUS

5.4HRS

OUTAGE SPAN

0.2days

AVG LOAD

157.5W

PACK DRAW

194.9W

Stack 1/2 HP sump with other devices on Anker SOLIX C1000 in the Load BuilderOpen Builder →

HARDWARE_INTERFACE // ELECTRICAL AUDIT

Anker SOLIX C1000 × 1/2 HP Sump Pump Electrical Interface

1. AC RECEPTACLE & PLUG MATCH

BS 1363 (230V 13A Irish Standard Plug) → DIRECT FIT

Provides 5× BS 1363 (230V), 1× CEE 7/3 (230V) (120V 60Hz).

2. WAVEFORM & THD SENSITIVITY

PURE SINE WAVE // STANDARD LOAD

Pure sine wave inverter output. Safe for all standard household appliances.

3. STARTING SURGE (MOTOR INRUSH) MARGIN

2300W TYP (2700W MAX) VS 2400W LIMIT

Inductive motor/compressor load with 2.2× starting surge (motor inrush) (4.2% worst-case surge margin).

4. UPS SWITCHOVER & EXPANSION

UPS: UPS (20MS) · EXPAND: UP TO 2112WH

Wall AC fast charge at up to 1300W (43m to 80%, 58m to 100%).

PHYSICS // TRANSIENT DRAW ENVELOPE

Dynamic Inrush Surge Curve (Locked Rotor Amps vs Steady State)

SAFE INRUSH HEADROOM (+100W BUFFER)

Safe envelope verified: Starting surge (2300W) remains comfortably below the 2400W surge trip line, with steady-state operation settling into the safe continuous zone at 1050W.

LAB_RECORDS // EMPIRICAL OBSERVATIONS

Field Engineering Quirks & Operational Failure Modes

Hardware Bench Constraints (Anker SOLIX C1000)

›SurgePad engages automatically above 1,800 W and runs heating loads up to 2,400 W; Anker says it isn't for precision or voltage-sensitive devices, and it's inactive in bypass.
›UPS: switches to battery in under 20 ms; in bypass the input is limited to 1,440 W (12 A).
›In Trusted Reviews' test, a PC and a NAS kept running through a mains cut on UPS mode.
›The AC outlets detect plugs: with nothing plugged in for over 15 minutes the unit powers down, and with outputs off and no load it powers off after 12 hours (adjustable in the app).
›UltraFast 1,300 W charging is switched on in the app; normal AC charging is 1,000 W, and Anker advises using UltraFast only occasionally.
›OutdoorGearLab ran it at maximum output for 33 minutes before it shut off, with loud fans near full load.
›The BP1000 expansion battery works only with the C1000.
›Anker's US store listed it at $599.99 but showed it sold out on 2026-10-21.

Cycle Physics & Dwell Behavior (1/2 HP Sump Pump)

›Sizing a backup source for a 1/2 HP sump pump is governed by its inductive starting surge (~2,300–2,700 W), which exceeds the 2,200 W starting limit of compact 2,000 W-class inverter generators.
›When connected to a portable power station, the station's AC inverter must stay on continuously waiting for the float switch, adding ~15 W of constant idle draw between pump cycles.
›Disable any power-saving AC auto-shutoff mode on the power station so the outlet remains live between float-switch cycles.

KNOWLEDGE_BASE // VERIFIED QA

Frequently Asked Questions: Anker SOLIX C1000 & 1/2 HP Sump Pump

How long will an Anker SOLIX C1000 run a 1/2 HP sump?

About 5.4 hours on AC power, with the 1/2 HP sump averaging 158 W (active storm: 15 cycles/h × 36 s at 1,050 W (158 W avg)). The Anker SOLIX C1000 then draws about 195 W from its battery, including 15 W for the inverter itself. Best case: about 32 hours (light rain: 4 cycles/h × 18 s at 800 W (16 W avg)). In the worst case (severe flooding: 24 cycles/h × 45 s at 1,150 W (345 W avg)) it exceeds the Anker SOLIX C1000's ratings.

Can an Anker SOLIX C1000 start a 1/2 HP sump?

Usually. A typical start-up peak of about 2,300 W fits under the 2,400 W surge rating, but a worst-case peak of 2,700 W does not.

How long does the Anker SOLIX C1000 take to recharge?

On wall power: about 43 minutes to 80% and 58 minutes to full (Anker SOLIX figures). With its maximum 600 W of solar input connected, expect about 480 W in full sun, so a full recharge takes roughly 2.3 hours of full sun, so it can refill in a single day with 4 peak sun hours.

AUDIT_LOG // DATA PROVENANCE & CITATIONS

NODE: anker-solix-c1000/sump-pumpSYSTEM HASH: 0x6877C8AD59E8VERIFIED TIMESTAMP: 2026-10-21T00:00:00Z

SOURCE_CITATIONS // ANKER SOLIX C1000 (6)

[01] MANUFACTURER_SPEC2026-10-21
Anker SOLIX C1000 product page (US) (Anker)
[02] MANUAL2026-10-21
Anker SOLIX C1000 (A1761) User Guide, US edition (2024-10-24) (Anker)
[03] MANUFACTURER_SPEC2026-10-21
Anker SOLIX C1000 product image (AC outlets) (Anker)
:: Five standard three-prong outlets plus one T-slot outlet labeled SurgePad. Anker's page text says '6x NEMA 6-20', a 250 V type that doesn't match the photo.
[04] LAB_TEST2026-10-21
Anker SOLIX C1000 review (UK 230 V unit, 2024-01-01) (Trusted Reviews)
:: AC power-meter discharges: 0.89 kWh at 200 W, 0.95 kWh at 750 W, 0.87 kWh at ~1.8 kW; ~94.4% via USB at 60 W; 120 W car charging.
[05] LAB_TEST2026-10-21
Anker SOLIX C1000 review (2025-05-18) (OutdoorGearLab)
:: Delivered 897 Wh at about 80% of rated output (≈1,440 W; exact load not printed); quotes the $999 list price.
[06] MANUFACTURER_SPEC2026-10-21
Anker SOLIX BP1000 expansion battery page (Anker)

LOAD_CITATIONS // 1/2 HP SUMP PUMP (2)

[01] MANUFACTURER_SPEC2026-10-21
Zoeller Model 98 (M98 / N98) 1/2 HP Submersible Sump/Effluent Pump Technical Data Sheet (FM0522) (Zoeller Pump Company)
:: 115 V, 1/2 HP PSC motor: 9.4 A full-load running current (~1,050–1,150 W) and ~2,300–2,700 W inductive starting surge.
[02] MANUFACTURER_SPEC2026-10-21
Wayne CDU800 1/2 HP Submersible Cast Iron Sump Pump Specifications & Manual (Wayne Water Systems)
:: 120 V 1/2 HP submersible sump pump drawing ~800 W under typical residential 8–10 ft head with ~1,800–2,300 W starting surge.

Compare Other Sources for 1/2 HP sump

REVERSE_SIZER →

EcoFlow DELTA 25.3h EcoFlow DELTA 2 Max10.7h Jackery Explorer 1000 v25.4h Bluetti AC1805.9h Honda EU2200iNO START Champion 4500W Dual Fuel Inverter (201319)24.1h Westinghouse iGen5000DF31.4h EcoFlow RIVER 2 ProOVERLOAD Anker SOLIX F380019.4h Bluetti AC200L10.7h Jackery Explorer 2000 Plus10.5h EcoFlow DELTA Pro 320.6h Goal Zero Yeti PRO 400020.3h Pecron E1500LFP7.9h DuroMax XP13000EH20.7h

Other Appliances on Anker SOLIX C1000

STATION_HUB →

CPAP Machine18.1h Full-Size Refrigerator12.3h Chest Freezer20.6h Wi-Fi Router41.0h Starlink Standard8.6h 1,500W Portable Space Heater1.0h 1/2 HP Deep Well Submersible PumpNO START Home Medical Oxygen Concentrator2.6h Portable Induction Cooktop (Single Burner)29m Mini-Fridge / Beverage Cooler25.1h Pellet Stove with Electric Auger5.9h Home Network & PoE Security System16.6h High-Velocity Box Fan11.0h Drip Coffee Maker45m